Update 300-360 WIDESIGN Designing Cisco Wireless Enterprise Networks

And allows you to work in the field of 300-360 WIDESIGN Designing Cisco Wireless Enterprise Networks with high efficiency.There are different ways to achieve the same purpose, and it's determined by what way you choose. A lot of people want to pass Cisco certification 300-360 exam to let their job and life improve, but people participated in the Cisco certification 300-360 exam all knew that Cisco certification 300-360 exam is not very simple. In order to pass Cisco certification 300-360 exam some people spend a lot of valuable time and effort to prepare, but did not succeed.

Share some CCNP Wireless 300-360 exam questions and answers below.
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data. 
What does this indicate about the signal strength? 
A. The area is below the minimum threshold configured on the tool. 
B. The area is below the detectable level and indicates no RF signal. 
C. The area is below -100 dBm at coverage cell edge. 
D. The area is below -67 dBm at coverage cell edge. 
Answer: A

A Cisco 7925 phone at a client¡¯s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully. 
What type of messages should the phone be sending at this point? 
A. H.245 
B. H.323 
C. MCGP 
D. SCCP 
Answer: D

An 802.11n implementation is being discussed. Users are satisfied with the potential 300-450 Mbps throughput of new 802.11n APs. Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.) 
A. 450 Mbps throughput is the client max for 5-GHz radio. 
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link. 
C. 300 Mbps throughput is the client max for 2.4-GHz radio. 
D. The remaining bandwidth is divided per device when more clients are connected to one AP. 
E. 100 Mbps Ethernet switch port is a potential bottleneck. 
F. CleanAir helps clear noise for 802.11n channel bonding to work. 
Answer: A,C,E

The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading? 
A. -62 dBm 
B. -67 dBm 
C. -60 dBm 
D. -70 dBm 
Answer: A

A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.) 
A. Use APs with external antennas. 
B. Use DoS attack on APs while measuring the throughput. 
C. Use APs with built-in antennas. 
D. Use a battery pack to power APs. 
E. Use a drawing of the office space to draw AP and client placements. 
F. Use APs with directional antennas. 
Answer: C,D,E

An engineer is planning for a 24 Mbps data rate for a new installation. 
What is the coverage area from the AP if the environment and other factors are not taken into consideration? 
A. 225 feet 
B. 80 feet 
C. 150 feet 
D. 100 feet 
Answer: B

A network engineer is preparing for an office site survey with a height of 2.5 meters. 
Which three components are recommended to complete the survey? (Choose three.) 
A. Use APs with external antennas. 
B. Use DoS attack on APs while measuring the throughput. 
C. Use APs with built-in antennas. 
D. Use a battery pack to power APs. 
E. Use a drawing of the office space to draw AP and client placements. 
F. Use APs with directional antennas. 
Answer: C,D,E

With Passtcert your career will change and you can promote yourself successfully in the IT area. When you select Passtcert you'll really know that you are ready to pass 300-360 Designing Cisco Wireless Enterprise Networks exam. We not only can help you pass the exam successfully, but also will provide you with a year of free service.There are a lot of sites provide the 300-360 WIDESIGN Designing Cisco Wireless Enterprise Networks for you.

The product of Passtcert not only can 100% guarantee you to pass the exam, but also can provide you a free one-year update service.300-360 certification exam is a very import component Cisco certification exam. But passing Cisco certification 300-360 exam is not so simple. In order to give to relieve pressure and save time and effort for candidates who take a preparation for the 300-360 certification exam, Passtcert specially produce a variety of training tools. So you can choose 300-360 WIDESIGN Designing Cisco Wireless Enterprise Networks from Passtcert to pass the exam.

Related article: http://h31-531-enu.blogspot.com/2017/09/update-cisco-certification-300-360.html